Siemens HB678GB 6M Series - Managing Oven Time Functions; Rapid Heat-Up and Timer Options

en Time-setting options
14
Example in the picture: Top/bottom heating at 180 °C.
1. Use the rotary selector to change the type of
heating.
2. Touch the default temperature.
3. Use the rotary selector to change the temperature.
4. Press the Start/Stop button to start.
The set type of heating and the temperature are shown
on the display.
Rapid heat up
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
Applying settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
1. Set the type of heating and temperature.
2. Press the c button.
The c symbol appears on the left next to the
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, an audible signal
sounds. The c symbol goes out. Place your dish in
the cooking compartment.
Notes
■ If a cooking time has been set, this runs
independently of rapid heating and counts down
immediately when the operation is started.
■ You can use the l button to check the current
cooking compartment temperature during rapid
heating.
Cancelling
Press the c button. The c symbol disappears from
the display.
OTime-setting options
Ti me- set t i ng opt i ons Your appliance has different time-setting options.
Notes
■ A cooking time of up to one hour can be set exactly
to the minute.
A cooking time over one hour can be set in five-
minute increments.
■ Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
■ After a time-setting option has elapsed, a signal
sounds and "Finished" appears in the status bar.
■ Using the l button, you can request information
during the operation, which then appears briefly in
the display.
:
4D hot air
%
Top/bottom heating
&
Intensive heat


&
7RSERWWRP
KHDWLQJ


&
7RSERWWRP
KHDWLQJ


&
7RSERWWRP
KHDWLQJ
PLQV
Time-setting option Use
Q
Timer The timer functions like an egg timer. An
audible signal sounds once the set time
has elapsed.
+
Cooking time A signal sounds once a set cooking time
has elapsed. The appliance switches off
automatically.
*
End time Set a cooking time and an end time. The
appliance switches off automatically so
that the operation ends at the desired
time.

&
PLQ

ꑛ
7RSERWWRP
KHDWLQJ