EasyManua.ls Logo

Siemens HB84E562 - Service and Programmes; After-Sales Service Information; Technical Specifications; Automatic Cooking Programmes

Siemens HB84E562
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found in the oven. You can make a note of the number of
your appliance and the telephone number of the after-sales
service in the space below to save time should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
This appliance corresponds to the standards EN 55011 and
CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose
of heating food. Class B states that the appliance is suitable for
private households.
Technical data
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
Automatic programmes
The automatic programmes enable you to prepare food very
easily. You select the programme and enter the weight of your
food. The automatic programme makes the optimum setting.
You can choose from 15 programmes.
Setting a programme
When you have selected a programme, set the oven. The
temperature selector must be in the zero position.
Example in diagram: Minced meat (programme 2) with a weight
of 1 kilogramme.
1. Set the function selector to automatic programmes X.
The first programme number appears in the display.
2. Use the @ or A button to select the programme.
E no.
FD no.
After-sales service
O
GB 0844 8928999
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to 6 pence
may apply.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
Power supply 220 - 240 V, 50 Hz
Maximum total connected load 3100 W
Microwave power setting 1000 W (IEC 60705)
Grill output power 2000 W
Hot air output power 1950 W
Microwave frequency 2450 MHz
Fuse 16 A
Dimensions (HxWxD)
appliance 454 x 595 x 563 mm
cooking compartment 236 x 445 x 348 mm
VDE approved yes
CE mark yes
This appliance is labelled in accordance with European
Directive 2012/19/EU concerning used electrical and
electronic appliances (waste electrical and electronic
equipment - WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
VWDUW
VWRS
NJ
VWDUW
VWRS
NJ

Table of Contents

Other manuals for Siemens HB84E562

Related product manuals