Siemens Hematek 3000 System - Page 69

7 Performing maintenance
Hematek
®
3000 System – Instruction Manual – Version 1.3 117
7
Disconnect underplaten tubing 10. On the middle panel, disconnect the rinse, buffer, and stain tubes from
the nipples.
11. Open the tube clamps.
12. Remove the tubes from the tube clamps.
13. Remove and clean the waste tank, see Chapter 6.5.
1 Middle panel
2 Nipples
3 Rinse tube
4 Buffer tube
5 Stain tube
6 Tube clamps
Figure 7-5 Disconnecting the underplaten tubing from the nipples
6
5
1 2 2 24
6
3