25
Cancelling operation
Press the
" button twice and switch off the appliance with
the
# button.
Notes
■ When you switch on the appliance using the # button, the
highest microwave power setting always appears in the
display as a suggestion.
■ If you open the appliance door during cooking, the fan may
continue running.
1, 2, 3 series of operations
You can use the series of operations function to set up to three
different microwave power settings and times and then start.
You can also set the grill in addition to the microwave power
settings.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
1. Press the # button.
Your appliance is ready for use.
2. Press the 2 button.
The
ª for the first operation in the series appears on the
display.
3. Set the first microwave power setting and cooking time.
4. Press the 2 button.
The
« for the second operation in the series appears.
5. Set the second microwave power setting and cooking time.
6. Press the 2 button.
The
¬ for the third operation in the series appears.
7. Set the third microwave power setting and cooking time.
8. Press the J button.
Operation begins. The total cooking time and the ª symbol for
the first operation in the series appear in the display.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Changes can only be made before operation begins. Press the
2 button repeatedly until the number for the series of
operations appears. Change the setting.
Opening the appliance door during operation
Operation is suspended. After closing the door, press the
J
button. Operation continues.
Pausing operation
Press the
" button. Operation is suspended.
Press the
J button to continue operation.
Cancelling operation
Press the " button twice and switch off the appliance with
the
# button.
Note: You can also combine the grill with a series of
operations. First, set the series of operations.
Grilling
Setting the grill
The following grill settings are available:
Example: medium grill, setting III, 15 minutes
1. Press the # button.
Your appliance is ready for use.
2. Press the , grill button twice.
, grill, setting II and 10:00 minutes appear in the display.
To set a different grill setting, press the , grill button again.
3. Set the cooking time using the rotary selector.
4. Press the J button.
The set Nx cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. 0:00 appears in the display. Press the "
button and switch off the appliance with the
# button. You can
stop the audible signal by pressing the
0 button.
Changing the setting
You can change the grill setting at any time. Then press the
J
button again.
, grill Setting III ¤ high Press the , button once
, grill Setting II £ medium Press the , button twice
, grill Setting I ¢ low Press the , button three times
To Next Page
Loading...
