26
Pausing operation
Open the appliance door. Grilling is interrupted. Press the
J
button again once you have closed the door. Operation
continues.
Cancelling the setting
Press the " button twice and switch off the appliance with
the
# button.
Note: If you open the appliance door during cooking, the fan
may continue to run.
MicroCombi operation
This involves simultaneous operation of the grill and the
microwave. Using the microwave makes your dishes ready
more quickly, but they are still nicely browned.
You can select any microwave power setting.
Exception: 900 and 600 watt.
Setting MicroCombi
Example: microwave 360 W, 17 minutes and grill setting 2.
1. Press the # button.
Your appliance is ready for use.
2. Press the button for the microwave power setting you require.
A suggested cooking time appears.
3. Set the cooking time using the rotary selector.
4. Press the , button 3 times.
The
¢ and Nx symbols light up in the display.
5. Press the J button.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed
A signal sounds. Combination mode has finished. You can stop
the audible signal by pressing the
0 button.
Changing the settings
You may change the grill setting or cooking time at any time.
Then press the
J button to resume operation.
Cancelling operation
Press the " button twice and switch off the appliance with
the
# button.
Opening the appliance door during operation
Operation is suspended. After closing the door, press the J
button. Operation continues.
Pausing operation
Press the
" button. Operation is suspended.
Press the
J button to continue operation.
Notes
■ You can also set the grill setting first and then set the
microwave power and cooking time.
■ If you open the appliance door during cooking, the fan may
continue to run.
Memory
The memory gives you the option to store your own settings
and call them up again at any time. You have two memories
available: "
j" and "k". The memory is useful if you prepare
one dish particularly frequently.
Saving settings in the memory
1. Press the # button.
Your appliance is ready for use.
2. Press the button for the microwave power setting you require.
The display above the power setting lights up and a
suggested cooking time is displayed.
3. Set the cooking time using the rotary selector.
4. Press the j or k button, a signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Notes
■ The programmes which have been set remain stored even if
there is a power cut.
■ You can also store settings for the grill, MicroCombi mode
and the series of operations.
Starting the memory function
You can start cooking at any time using the settings saved for
your dish.
1. Press the # button.
Your appliance is ready for use.
2. Press the j or k button.
The saved settings are displayed.
3. Press the J button.
The memory setting starts. The
x cooking time counts down
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: Saved settings are retained even after a power cut.
The cooking time has elapsed
A signal sounds. The memory function has finished. You can
stop the audible signal by pressing the
0 button. Use the #
button to switch off the appliance or make new settings.
Pausing operation
Press the
" button or open the appliance door. Operation is
suspended. After closing the door, press the
J button.
Operation continues.
To Next Page
Loading...
