15 blk/gry 17 Free
gry/blk 37
4 16 yel/blu 08 Free
blu/yel 28
Group Pair a-wire b-wire SU conn. TML8W Notes
BP: X8
3.3.11 TMOM
Introduction
The TMOM (trunk module outgoing multipurpose) board provides various interfaces for the
connection of radio paging equipment (PSE) to Hicom 150 E OfficePro.
Application information
Hicom 150 E OfficePro may only be equipped with a maximum of one TMOM.
Enhanced radio paging equipment can be additionally connected.
Function of the switches (Figure 3-36)
Lockout switch S1
- On (down): Board locked
- Off (up): Normal mode
DIP-FIX switches S2, S3 for a/b port changeover for split, incoming and outgoing traffic with
an 8-wire connection according to ESPA 4.4.3.
- 2-wire (factory default): S2 in position 1-3, S3 in position 1-3
- 4-wire: S2 in position 1-2, S3 in position 1-2
DIP-FIX switch S4 for potential changeover for KX1 to KX16 relay contacts and indicators 1
to 4 (not supported).
- Position 1-2: Internal earth terminator (0 V)
- Position 1-3: External potential (from MDFU, factory default)
DIP-FIX switches S5 to S8 for activating indictors 1-4 (not supported)
DIP-FIX switches S9, S10 for potential connection for relay contacts
KX1 to KX16 and indicators 1 to 4 (not supported)
Switches on TMOM
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_32.htm (31 of 46) [06/04/2000 13:03:54]
To Next Page
Loading...
