Siemens Hicom 150 E Office - Page 126

Figure 3-57 PFT by means of PFT1/PFT4
Installation location of the PFT1/PFT4 board (MDFU/MDFU-E)
PFT1 and PFT4 are incorporated with wires in the MDFU/MDFU-E and require
-48 V. See Figure 3-59 for the assignments for both boards.
Figure 3-58 Installation location of PFT1 and PFT4 (MDFU/MDFU-E)
PFT1/PFT4 board assignment
Hicom 150 E Office Rel.1.0 Service Manual - 3.4 Options
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_33.htm (7 of 16) [06/04/2000 13:04:11]