Siemens Hicom 150 E Office - Plus Products; V24;1; V24;2

X3
5 K 3.22 CO contact K3.2 NO contact
6 K 3.23 CO contact K3.2 NC contact
7 K 2.21 CO contact K2.2 IN
8 K 2.22 CO contact K2.2 NO contact
X4
1 K 2.23 CO contact K2.2 NC contact
2 K 1.21 CO contact K1.2 IN
3 K 1.22 CO contact K1.2 NO contact
4 K 1.23 CO contact K1.2 NC contact
5 +12VI +12V control voltage optocoupler
6 OPTKP 2 Control input optocoupler 2
7 +12VI +12V control voltage optocoupler
8 OPTKP 1 Control voltage optocoupler 1
X5
1 K 3.12 CO contact K3.1 NO contact
2 K 3.13 CO contact K3.1 NC contact
3 K 2.11 CO contact K2.1 IN
4 K 2.12 CO contact K2.1 NO contact
5 K 2.13 CO contact K2.1 NC contact
6 K 1.11 CO contact K1.1 IN
7 K 1.12 CO contact K1.1 NO contact
8 K 1.13 CO contact K1.1 NC contact
X6
1 OPTKP 3 Control input optocoupler 3
2 +12VI +12V control voltage optocoupler
3 OPTKP 4 Control input optocoupler 4
4 +12VI +12V control voltage optocoupler
5 K 4.11 CO contact K4.1 IN
6 K 4.12 CO contact K4.1 NO contact
7 K 4.13 CO contact K4.1 NC contact
8 K 3.11 CO contact K3.1 IN
3.4.10 V24/1 / V24/2
Introduction
The V24/2 module in OfficeCom/OfficePoint has two serial V.24 interfaces for connecting a PC,
printer or Plus products (e.g. GCM).
Hicom 150 E Office Rel.1.0 Service Manual - 3.4 Options
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_33.htm (12 of 16) [06/04/2000 13:04:11]