3.5 Using boards from Hicom 150 E / Hicom 100 E
Overview
The following tables show which boards from the systems
Hicom 150 E Releases 1.0, 2.0, 2.1
Hicom 100 E Releases 2.02, 2.1
can be used in Hicom 150 E Office Release 1.0.
The use of old boards not listed in the table is prohibited in Hicom 150 E Office Release 1.0.
Boards from Hicom 150 E Releases 1.0, 2.0, 2.1
Table 3-45 Boards from Hicom 150 E Releases 1.0, 2.0, 2.1
Board/
component
Part number Use in
Hicom 150 E OfficePro
CBMOD S30810-Q2960-X Remote admin. and maintenance not possible
via the integrated digital modem (B channel
access) (see also Section 6.1.5).
CGM S30807-Q6906-X yes
CONBO S30810-Q2924-X yes
FMC S30807-Q6910-X yes
GEE8 S30817-Q664-Xxxx yes
IMOD S30807-Q9607-X yes
MDFU S30805-U5140-X yes
MDFU-E S30805-U5283-X yes
PFT1/PFT4 S30777-Q539-X
S30777-Q540-X
yes
PSUI S30122-K5083-L301
S30122-K5083-X301
yes
REAL S30807-Q5913-X yes
SLA16 S30810-Q2702-X yes
SLMC8 S30810-Q2911-X yes
SLMO8/SLMO24 S30810-Q2901-X/Xxxx yes
Hicom 150 E Office Rel.1.0 Service Manual - 3.5 Using boards from Hicom 150 E / Hicom 100 E
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_34.htm (1 of 3) [06/04/2000 13:04:15]
To Next Page
Loading...
