Siemens Hicom 150 E Office - Page 15

10.3.1 Memo for Hicom
10.4 Entrance telephones
10.4.1 Direct connection without ET
10.4.2 Connection via ET adapter box
10.4.2.1 Connection examples
10.4.3 ET/A adapter (S30817-Q936-A313)
10.4.4 Connection via ET/A adapter box
10.5 Loudspeaker
10.6 Connecting a data telephone
10.7 Hicom Attendant P
11 Plus products
12 Cordless Multicell Integration CMI
12.1 Introduction
12.2 Requirements for the operation of Hicom cordless 150 E
12.3 Mounting and connecting the base station
12.3.1 Mounting the base station indoors
12.3.2 Mounting the base station outdoors
12.3.2.1 Mounting base station on the mast outdoors
12.3.2.2 Mounting on outdoor wall with mounting plate
12.3.2.3 Outdoor wall mounting without mounting plate
12.3.3 Connecting the base station
12.4 Mobile telephone login/logout on the system
12.5 Radio tests
12.5.1 Checking the radio coverage
12.5.1.1 Testing the base stations
12.5.1.2 Testing the area coverage
12.5.2 Testing the radio quality
12.5.3 Result documentation
12.6 Testing the Hicom cordless 150 E components
12.6.1 Checking the base station BS
12.6.2 Checking the mobile telephone
12.6.3 Checking the entire system
12.6.4 Checking the radio coverage
12.7 Information for the correction of possible mobile telephone faults
12.8 Site selection for the base station
Hicom 150 E Office Rel.1.0 Service Manual - Contents
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/index.htm (13 of 16) [06/04/2000 13:02:10]