Siemens Hicom 150 E Office - Page 16

12.8.1 General information on the base station
12.8.2 Propagation conditions for radio traffic
12.8.2.1 Radio wave propagation in free field with visibility
12.8.2.2 Radio wave propagation in industrial areas
12.8.2.3 Radio wave propagation inside buildings constructed using brick
and lightweight materials
12.8.2.4 Radio wave propagation inside reinforced concrete buildings with
different interiors
12.8.3 Base stations - wave propagation
12.8.3.1 Where must base stations not be installed?
12.8.3.2 Where should base stations be installed?
12.9 Technical data and functions of Hicom cordless 150 E Version 1
12.9.2 Base station data
12.9.3 Mobile telephone data
12.9.4 Hicom cordless 150 E system number
12.9.5 Base station features
12.9.6 Mobile telephone features
13 Service
13.1 Overview
13.2 On-site service
13.2.1 Customer data backup
13.2.1.1 Playing back a CDB to a replacement board (CBMOD, CBFC)
13.2.2 Replacing or upgrading the system software
13.2.2.1 CDB upgrade
13.2.2.2 Flash memory card replacement
13.2.2.3 APS transfer
13.2.3 Board replacement (not applicable to Hicom 150 E OfficeOne)
13.2.4 Terminal replacement
13.3 Error detection, signalling and correction
13.3.1 LED signalling concept for central boards
13.3.1.1 Hicom 150 E OfficePro / Hicom 150 E OfficeCom / Hicom 150 E
OfficePoint
13.3.1.2 Hicom 150 E OfficeOne
13.3.2 LED signalling concept for peripheral boards
13.3.2.1 Hicom 150 E OfficePro
13.3.2.2 Hicom 150 E OfficeCom / Hicom 150 E OfficePoint
Hicom 150 E Office Rel.1.0 Service Manual - Contents
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/index.htm (14 of 16) [06/04/2000 13:02:10]