Siemens Hicom 150 E Office - Procedure for Installing Hicom 150 E Officeone

To Next Page

To Previous Page

Figure 4-29 OfficePoint slots

4.2.3 Procedure for installing Hicom 150 E OfficeOne

Step Installation activity

1. Select the installation site (is generally already predefined)

2. Unpack the components

3. Attach the housing to the wall

4. Lay the cables

5. Connect the terminals

6. Connect the plug-in power supply unit

7. Perform a visual inspection

8. Close the hinged cover

Hicom 150 E Office Rel.1.0 Service Manual -

http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_4fc.htm (6 of 9) [06/04/2000 13:04:51]

Other manuals for Siemens Hicom 150 E Office