Radio tests
Checking the radio coverage
Testing the radio quality
Result documentation
page 12-19
Testing the Hicom cordless 150 E components page 12-26
Information for correction of possible mobile telephone faults page 12-28
Site selection for the base stations page 12-30
Technical data and functions of Hicom cordless 150 E Version 1
System data
Base station data
Mobile telephone data
Hicom cordless 150 E system number
Features of the base station
Features of the mobile telephone
page 12-50
12.2 Requirements for the operation of Hicom
cordless 150 E
Plug-in module CGM (S30807-Q6906-X) for CBMOD board (supplies the base station with
highly accurate clock pulse).
Module not available: upgrade CGM (plug-in contact on CBMOD).
SLMC8 module
Module not available: upgrade SLMC8. For further information on upgrading periphery boards,
please refer to Section 6.1.2.
The SLMC8 has a unique code and can only be used once to equip a Hicom 150 E
OfficePro system with Hicom cordless 150 E.
When the SLMC8 board is plugged in, 16 MTs are enabled for use (PIN numbers are
allocated) and can be logged in. Other MTs must first be enabled before they can be
used (see Section 12.4).
Hicom 150 E Office Rel.1.0 Service Manual - 12 Cordless Multicell Integration CMI
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_12.htm (3 of 45) [06/04/2000 13:05:55]
To Next Page
Loading...
