Siemens Hicom 150 E Office - Mounting on Outdoor Wall with Mounting Plate

12. Mount sunshade (if required): to do this, snap sunshade into holes on side of mounting plate
(see Figure 12-6).
Mounting mast of the base station
Figure 12-5 Mounting the BS on a mast
Position of BS and heating board in outdoor casing
Figure 12-6 Position of BS and heating board in outdoor casing
12.3.2.2 Mounting on outdoor wall with mounting plate
Materials required
Two screw plugs measuring 8 mm
, two screws.
Hicom 150 E Office Rel.1.0 Service Manual - 12 Cordless Multicell Integration CMI
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_12.htm (8 of 45) [06/04/2000 13:05:55]