Siemens Hicom 150 E Office - Optiset E Entry; Optiset E Terminals

Configuration restrictions
Analogue terminals page 9-21
ISDN terminals page 9-22
9.2 optiset E
Introduction
Terminals in the optiset E family support digital voice and data communication (no data
communication in the case of the optiset E entry and standard terminals). Equipment with displays
also offer enhanced use through the interactive user interface.
Up to 16 additional keys per telephone can be used by connecting an add-on device
optiset E adapters support Plug and Play. This means that the system detects and activates them
automatically. You can connect equipment such as a PC, analog terminal, S
0
equipment, headset and
speaker.
9.2.1 optiset E terminals
9.2.1.1 optiset E entry
Main features
Telephone model for digital voice communication with the following main features:
3 function keys (can be changed with Hicom Assistant E) with LEDs
No modular configuration (i.e. no adapter connection), no display
Standard (default) key assignments for optiset E entry
Hicom 150 E Office Rel.1.0 Service Manual - 9 Terminals
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_9.htm (2 of 17) [06/04/2000 13:06:13]