Siemens Hicom 150 E Office - Automatic Error Correction; Error Correction Options

No. Meaning Recovery
action
Technician
action
0 Unknown board type None Replace board
1 Board deactivated Reload board None
2 More than one SLMC None Only 1 SLMC
3 Board type incompatible None Replace board
Error class 28 - Recovery
Table 13-13 Error class 28 - recovery
No. Meaning Recovery
action
Technician
action
4 Remote test input None None
Error class 29 - IOP
Table 13-14 Error class 29 - IOP
No. Meaning Recovery
action
Technician
action
24 Board failure Reload board Replace board
25 Board is present. LW was restarted. Reload board Replace board
13.3.6 Error correction options
Variant Page
Automatic error correction 13-17
Manual error correction without Hicom Assistant E 13-17
Error correction with Hicom Assistant E 13-18
13.3.6.1 Automatic error correction
Each error in the error memory is assigned an action that can correct the error that occurred. The
following software actions can be carried out:
Hard restart
Reload board
Reload CDB backup
Disable ports
Hicom 150 E Office Rel.1.0 Service Manual - 13 Service
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_13.htm (13 of 19) [06/04/2000 13:06:54]