Siemens Hicom 150 E Office - Page 281

Table A-2 Starting system administration
Step Entry Explanation
1. *95 Code for system administration
2. Watch the display.
Scroll until "All data?" appears.
Confirm!
3. 31994 Password for access to system administration
Table A-3 Expert mode code groups
Code group Function
11 Call detail recording
12 Central abbreviated dialling
13 Account code
14 Extension data menu
15 Call barring menu
16 Call management inc.
17 Call management out.
18 Boss/secretary
19 Display text menu
20 ISDN parameter menu
21 Analogue parameters
22 System options
23 Trunk access codes
24 Doorphone setup
25 Announcement device
26 Actuator setup
27 Sensor setup (OfficeCom/OfficePoint only)
28 Print cust. data
29 System details
30 Remote admin
31 UCD menu (OfficePro/OfficeCom only)
32 Radio paging equip
33 Attendant console
34 DISA
35 Least cost routing
Hicom 150 E Office Rel.1.0 Service Manual - A System programming codes
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (5 of 18) [06/04/2000 13:07:13]