15 Call barring menu
15 1 Trunk access, day, specify reference extension,
enter new data:
0 = no access, apart from with abbreviated dialling numbers
1 = incoming only
2-7 = allowed list/allowed list 1-6
8-13 = barred list/barred list 1-6
14 = full access
15 2 Trunk access, night, specify reference extension
enter new data:
0 = no access, apart from with abbreviated dialling numbers
1 = incoming only
2-7 = allowed list/allowed list 1-6
8-13 = barred list/barred list 1-6
14 = full access
15 3 1 Allowed list 1, 100 positions
15 3 2 Allowed list 2, 10 positions
15 3 3 Allowed list 3, 10 positions
15 3 4 Allowed list 4, 10 positions
15 3 5 Allowed list 5, 10 positions
15 3 6 Allowed list 6, 10 positions
15 4 1 Barred list 1, 50 positions
15 4 2 Barred list 2, 10 positions
15 4 3 Barred list 3, 10 positions
15 4 4 Barred list 4, 10 positions
15 4 5 Barred list 5, 10 positions
15 4 6 Barred list 6, 10 positions
15 5 Number of authorised extensions (for checking purposes only)
15 6 Code lock
0 = no access, apart from with abbreviated dialling numbers
1 = incoming only
2 - 7 = allowed list 1-6
8- 13 = barred list 1-6
14 = full access
15 7 End of dial mode, 0 = per digit, 1= en-bloc
16 Call management inc.
16 10 Internal numbers
16 10 1 Extension numbers
16 10 1 1 Change extension numbers
16 10 1 2 Search for extension numbers
16 10 2 Change group call numbers
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (8 of 18) [06/04/2000 13:07:14]
To Next Page
Loading...
