17 Call management out.
17 11 Simplified dialling, 0 = off/1 = on
17 12 Route assignment, select slot/line and assign route
Routes 1-8 (OfficePoint)
Routes 1-16 (OfficeCom/OfficePro)
17 13 Route overflow, select route and assign overflow route
17 14 Route type, select route:
0 = CO/1 = PBX
17 15 Route name, select route and enter names (optiset E memory only)
17 16 Route seizure, select route: 0=cyclical/1=linear
17 17 Route optimise (optimised B channel use)
17 17 1 Optimise route, 0 = no/1 = only if known/2 = always
17 17 2 Change route, 0 = denied/1 = allowed
17 18 Central attendant
17 19 Central routing
17 19 1 Logging station number
17 19 2 System node number, 1-255
17 19 3 Group code, 1-40
17 19 4 Node number
17 20 Digit repetition, select route, 0 = off/1 = on
17 21 Path optimization, 0 = no/1 = no
18 Boss/secretary
18 1 Boss/secretary groups, select group, entry:
1 = boss 1/2 = boss 2/3 = secr. 1/4 = secr. 2
OfficePro: group 1-16
OfficeCom: group 1-10
OfficePoint: group 1-4
18 2 Hotline
18 2 1 Hotline destinations
OfficePro/OfficeCom destination 1-6
OfficePoint destination 1
18 2 2 Hotline station number
18 2 2 1 Hotline mode, 0 = off/1 = hotline/2 = hotline after timeout
18 2 2 2 Hotline assignment
OfficePro/OfficeCom 1-6
OfficePoint 1
18 2 3 Hotline timeout, 1-99 x s
18 3 TRG groups (traffic restriction groups)
18 3 1 Group setup
18 3 1 1 Station (group 1-6)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (10 of 18) [06/04/2000 13:07:14]
To Next Page
Loading...
