26 Actuator setup
26 1 Type, select actuator 1 - 4 and assign function:
11 = Manual on/off
12 = Auto off on timeout
13 = Door opener
14 = Speaker amplifier (activation contact for amplifier)
15 = Engaged display
16 = Music on hold
17 = Simu meter pulse
18 = W2 balance
19 = extension active
20 = Announcement
26 2 React time
Select actuator 1 - 4 and enter digit(s) (max. 3) (0-255)
26 3 Assigned extension
Select actuator 1 - 4 and enter extensions/groups
(max. 5 digits)
26 4 Actuator names, select actuator 1 - 4, enter alphanumeric names contain max. 16
characters (optiset E memory only)
27 Sensor setup (OfficeCom/OfficePoint only)
27 1 Sensor type, 0 = alarm/1 = UCD
27 2 Destination number, select sensor 1 - 4 and enter extension number, group number or
external call number (with seizure code), max. 31 digits
27 3 Number for announcement, select sensor 1 - 4 and enter extension number of group
number (max. 6 digits)
27 4 Voice mail data, select sensor 1 - 4 and enter the control characters 0 - 9, *, #, max.
24 digits
27 5 Call duration, select sensor 1 - 4 and enter 1 - 255
27 6 Call interval, select sensor 1 - 4 and enter 0 - 255
27 7 Number of calls, select sensor 1 - 4 and enter 1 - 255
27 8 Damping, select sensor 1 - 4 and enter 0 - 255
27 9 Sensor names, select sensor 1 - 4, enter alphanumeric names containing max. 16
digits (optiset E memory only)
28 Print customer data
28 Print request
29 System details
29 1 System
29 1 1 System type (for checking purposes only)
29 1 2 SW version (for checking purposes only)
29 2 Status display
29 2 1 Call forwarding, external, off/on (for checking purposes only)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (14 of 18) [06/04/2000 13:07:15]
To Next Page
Loading...
