32 5 1 2 Display, filler: 0=none/1=left/2=right
32 5 1 3 Filler
32 5 2 Text
32 5 2 1 Code length
32 5 2 2 Display, filler: 0=none/1=left/2=right
32 5 2 3 Filler
32 6 PSE data transfer, Select sequence: 1 = operation mode/
2 = number/3 = text
32 7 PSE dial assignment, Select Ext
32 8 PSE dial numbers, Select Member
33 Attendant console
33 1 Max. waiting calls
33 2 Queue timer
33 3 Speed transfer, 0 = denied/1 = allowed
33 4 Transfer undialled, 0 = denied/1 = allowed
34 DISA
34 1 Day, night, select slot/line, 0 = none/1 = night only/
2 = day only/3 = day and night
34 2 DDI numbers
34 3 Security mode, 0 = after timeout/1 = after #
35 Least cost routing (optiset E memory only)
35 1 Routing on/off, 0 = off/1 = on
35 2 Dial control, 0 = per digit/1 = en-bloc
35 3 Outdial rule
35 3 1 Name, select line
35 3 2 Format, select line
35 3 3 Type, select line,
0 = Unknown
1 = Main carrier
2 = 1layer mode
3 = 2layer mode
4 = CN
5 = DICS
6 = PRI
35 4 PIN number, select index (1-16)
35 5 LCR schedule
35 5 1 Length of time, select day index (1=Monday to 7= Sunday) and time format (hhmm)
35 5 2 Time period, select day index (1=Monday to 7= Sunday) and time period 1-8
35 6 Restriction (1-15), select extension
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (17 of 18) [06/04/2000 13:07:15]
To Next Page
Loading...
