Siemens Hicom 150 E Office - Page 307

Code lock on/off
Answer group on/off
Absence text on/off
Hunt group on/off
Reset features
Actuators on/off
Night service on/off
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
S
0
terminals S
0
terminals must dial the substitute code (75) for "asterisk" (*).
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure extensions
* 9531994
2. 14-14 => Extension Data Menu - Associated Dial
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure extensions
Options
2. Set up station
Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (13 of 19) [06/04/2000 13:07:31]