Siemens Hicom 150 E Office - Services in the Talk State

Query via Hicom Assistant E
Query the feature via Hicom Assistant E as follows:
Step Action
1. Perform query
System status
2. System-wide
3. Telephone
4. CO call privileges: number
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Using the procedure, query the number of extensions with direct trunk access.
7.10.10 Services in the Talk State
Definition
During a call, an extension can activate various services or perform various administrative tasks via
system administration.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
CFW Call forwarding can be activated during a call.
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. During a call, initiate call forwarding by means of the relevant procedure.
Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (15 of 19) [06/04/2000 13:07:31]