Siemens Hicom 150 E Office - Page 334

8.1 Call detail recording using a P500 printer
Settings in the system
Programming with Hicom Assistant T
Step Input Action Display
1. *95 31994 Start system administration System Administration
2.
22-13-1
Set baud rate 2400 or 9600 bd
3. F7 Return to: V.24 Configuration V.24 Configuration
4. 2 V.24 port allocation Port Allocation
5. 1 Port for CDRC V.24-Port: -
6.
*1
Select port for CDRC V.24-Port: 1
7. F8 Return to main menu System Administration
8.
11-3-1
Define print format Output: Compressed
9.
F2
Go to: Digit Suppression Suppress Digits: No
10.
F2
Go to: Incoming Calls Output: No
11.
F2
Go to: Call Duration Output: Yes
12.
F2
Go to: Call Charge Factor Factor: 12
13.
F2
Go to: Currency Unit Currency: DM
14.
F2
Go to: ISDN Factor Factor: 12
15.
F2
Go to: On Ringing Output: No
16.
F2
Go to: Print MSN Output: No
17. F8 F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Port settings for CDRC
System status -> Call charges -> Output format
Hicom 150 E Office Rel.1.0 Service Manual - 8.1 Call detail recording using a P500 printer
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_81.htm (1 of 2) [06/04/2000 13:07:55]