Siemens Hicom 150 E Office - Call Detail Recording at Station (CDRS); Optiset E; Definition

7.12.4 Call Detail Recording At Station (CDRS)
Definition
Every optiset E, a/b, S
0
(or each MSN), CMI terminal in the system has a call charge summation
memory (call charge memory). At the end of an external call, the final charges are added onto the
already existing call charges in the extension`s call charge memory. The user of an optiset E station
with a display can view his or her current call charges by means of a code.
The current CDRS data can be printed out on a printer connected to one of the V.24 interfaces. The
data is then printed out for all extensions connected to the system.
The system telephone (terminal with programming authorisation) can be used as a call charge display
extension. This extension can:
Display the call charges for one extension.
Display the call charges for all extensions (in the order of their extension numbers).
Reset the call charge memory for a special extension.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements With loop start:
GEE8
optiset E
terminal with
display
With loop start:
GEE12/16/50
optiset E
terminal with
display
With loop start:
GEE12/16/50
optiset E
terminal with
display
optiset E
terminal with
display
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
General
requirements
Call charge information from public network
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Conduct a chargeable call.
Hicom 150 E Office Rel.1.0 Service Manual - 7.12 Features for Call Detail Recording
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_712.htm (5 of 21) [06/04/2000 13:08:18]