Siemens Hicom 150 E Office - Page 382

15.
F2 * 7
Enter the code length for text
(depending on the PSE)
Amount: 7
16.
F2 * 2
Enter fillers for text
(depending on the PSE)
Fillers: Right
17.
F2 * #
Enter fillers for text
(depending on the PSE)
Fillers: #
18.
F2 * 1
Enter PSE data (transfer sequence)
(depending on the PSE)
Sequence 1: Op.mode
19.
+ * 2
Enter PSE data (transfer sequence)
(depending on the PSE)
Sequence 2: Call No.
20.
+ * 3
Enter PSE data (transfer sequence)
(depending on the PSE)
Sequence 2: Text
21.
F2 * 1
Enter PSE dial assignment
(index)
Ext 100: 1
22.
F2 * 000
Enter the number of the pocket receiver Index 1: 000
23. F8-F7 Exit system administration Set time, Set date
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.42 Connecting enhanced PSE radio paging equipment (multitone) to a TMOM board
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_842.htm (2 of 2) [06/04/2000 13:08:57]