Siemens Hicom 150 E Office - Design of Hicom 150 E Officepoint

Figure 2-2 Hicom 150 E OfficeCom dimensions
2.3.3 Design of Hicom 150 E OfficePoint
Configuration notes
Hicom 150 E OfficePoint is identical to Hicom 150 E OfficeCom as far as basic dimensions are
concerned. It differs from Hicom 150 E OfficeCom with its low mounting depth which results from a
reduced number of slot levels.
This is a modular system with two freely configurable board slots. The slots are assigned as follows:
Slot 1: peripheral boards (accommodates two boards)
Slot 2: CBFC central board only
Slot 3: optional boards (up to 5 modules)
The PSU/UPS is located at the rear of the subrack. Hicom 150 E OfficePoint does not require an
external main distribution frame. The connection lines are connected directly to the boards.
Dimensions
Hicom 150 E Office Rel.1.0 Service Manual - 2 System data
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_2.htm (4 of 13) [06/04/2000 13:02:34]