Siemens Hicom 150 E Office - Page 394

Simultaneous ann. 30 30 - -
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure announcement device
* 9531994
2. 25-1 => Announcement Devs. - Announcement
3. Announcement device via sensors (OfficeCom, OfficePoint)
4. 27-1 to 9 => Setting parameters for sensors
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure announcement device
Options
2. Trunk modules
3. Announcement
4. Configure sensors
Options
5. Trunk modules
6. Sensors
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Set up announcement device.
2. Assign an extension and a port.
Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (9 of 18) [06/04/2000 13:09:16]