Undialled line It is possible to switch an undialled line.
Busy external line Busy external lines can be released selectively by means of a procedure.
Second extension number The AC can be reached under a second extension number (default: 9, 0 in
USA/GBR).
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure intercept position
*9531994
2. 16-12 => Call Management Inc - Intercept, Day
3. 16-13 => Call Management Inc - Intercept, Night
4. 16-14 => Call Management Inc - Intercept Options
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure intercept position
Options
2. System Parameters
3. Intercept criteria
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1.
2.
3.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (14 of 18) [06/04/2000 13:09:16]
To Next Page
Loading...
