Siemens Hicom 150 E Office - Design of Hicom 150 E Officeone; Hicom 150 E Officepro System Environment; System Environment

Figure 2-3 Hicom 150 E OfficePoint dimensions
2.3.4 Design of Hicom 150 E OfficeOne
Configuration notes
Hicom 150 E OfficeOne is designed as a one-cabinet system for wall mounting. The flat housing
contains a single-board system and connection options for the trunk connections and stations.
The connection lines to the peripherals (terminals, trunk lines, etc.) are connected directly to the board
and fed out via a cable duct inside the housing.
Dimensions
Figure 2-4 Hicom 150 E OfficeOne dimensions
2.4 System environment
2.4.1 Hicom 150 E OfficePro system environment
Hicom 150 E Office Rel.1.0 Service Manual - 2 System data
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_2.htm (5 of 13) [06/04/2000 13:02:34]