1. Define distinctive ringing (for extension and groups)
Options
2. Set up station
3. Double-click on parameter for relevant extension
4. Flags
5. Modify distinctive ringing
Options
6. System Parameters
7. Tones and ring types
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Define distinctive ringing for internal extensions.
2. Define distinctive ringing for external extensions.
3. Make a call from an internal extension.
4. Make a call from an external extension.
There should be a perceptible difference between the two rings.
7.2.2 Ring injection / Camp-on
Definition
If a caller reaches a busy extension, a camp-on tone sounds to let the called party know that a call is
waiting. The called party then has the option of answering the call without interrupting the call in
progress.
If the called party has a display telephone, the camped-on call is also signalled visually.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Number of waiting calls per extension 16 16 16 16
Dependencies/Limitations
Subject Dependency/Limitation
Camp-on rejection If a subscriber has activated camp-on rejection (signalling security), the call
cannot be camped on.
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (2 of 48) [06/04/2000 13:09:57]
To Next Page
Loading...
