Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure groups
Options
2. Incoming Calls
3. Hunt group
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1.
2.
3.
7.2.7 Group Call
Definition
Incoming external and internal calls are signalled simultaneously at the allocated group members. The
first subscriber to answer the call is connected to the calling party.
The group call is implemented via call management.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Groups/extensions 150/20 150/20 20/8 20/8
Dependencies/Limitations
Subject Dependency/Limitation
Ext. call forwarding If at least one subscriber in a group has activated external CFW, unscreened
transfer can be carried out to this group.
A/b terminals The system does not check whether a/b terminals are present. Nevertheless,
the user must log the terminal onto the system by lifting the handset once.
Intercept If the call cannot be signalled at any terminal, it should be intercepted.
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (13 of 48) [06/04/2000 13:09:58]
To Next Page
Loading...
