Camp-on If all extensions in a hunt group are busy, the call "camps on" at all
extensions.
Call signalling If all hunt group extensions hang up simultaneously, call signalling is
activated at all extensions which previously had waiting calls.
Do not disturb If all extensions in the hunt group activate do not disturb, the call is
handled according to the call management procedure.
Hunt group Individual extensions can belong to more than one group.
Queue If the number of calls directed to the hunt group exceeds the number
that can currently be processed, the excess calls are placed in a queue.
An announcement can be played for the callers during the wait time
(entered ahead of the hunt group in call management).
Overflow, call forwarding -
no answer
You can use call management to set up an overflow extension as a
CFNA destination for hunt groups.
Hunt group
on/off
Each member of a hunt group can leave a hunt group with #85 and
rejoin the hunt group with *85.
Group call If a subscriber is entered in a ringing and a hunting group, both
features should be modified such as *85/#85 for example.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure hunt group
*9531994
2. 16-15-1 => Call Management Inc - Group Setup - Group Members
3. 16-15-2 => Call Management Inc - Group Setup - Group Type
4. 16-15-3 => Call Management Inc - Group Setup - Group Name
1. Set CFNA timeout
*953199
2. 16-18-5 => Call Management Inc - CM-Elements - Ring Attempts
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure hunt group
Options
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (17 of 48) [06/04/2000 13:09:58]
To Next Page
Loading...
