2. Incoming Calls
3. Hunt group
1. Set CFNA timeout
Options
2. Incoming Calls
3. Call destination lists
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Set up hunt group.
2. Call the hunt group`s number.
3. The first extension rings.
If the call is not answered, or the extension is busy, the second extension rings.
7.2.10 Leave Group Call/Hunt Group (Stop Hunt)
Definition
An internal extension which is entered in call management as a member of one or more groups can
both leave and rejoin all groups by means of a procedure.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Groups/extensions 150/20 150/20 20/8 20/8
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (18 of 48) [06/04/2000 13:09:58]
To Next Page
Loading...
