Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure queue
*9531994
2. 31-2-1 => UCD Menu - Group Options - Queue device
3. 31-2-2 => UCD Menu - Group Options - Queue timers
4. 31-2-3 => UCD Menu - Group Options - Call cycles
5. 31-2-4 => UCD Menu - Group Options - AICC connection
6. 31-2-5 => UCD Menu - Group Options - Max. waiting calls
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure queue
2. Incoming Calls
3. UCD groups
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1.
7.2.13 Call Prioritisation
Definition
Within the queue, incoming internal and external calls for the UCD group are prioritised according to
call type.
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (21 of 48) [06/04/2000 13:09:58]
To Next Page
Loading...
