General requirements optiset E with display optiset E with display _ _
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. When a UCD extension is logged on, answer the queued calls using the code or the procedure.
7.2.22 UCD "Home Agent"
Definition
It is possible to integrate an off-premises extension (analog terminal) into the UCD group as a "home
agent".
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x _ _
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 _ _
Dependencies/Limitations
Subject Dependency/Limitation
UCD Only the main functions are available using the code (Log On, Wrap Up are not available).
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (32 of 48) [06/04/2000 13:09:59]
To Next Page
Loading...
