Step Action
1. Configure call distribution
*9531994
2. 31-1 => UCD Menu - Group Setup
3. 31-2 => UCD Menu - Group Options
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure call distribution
2. Incoming Calls
3. UCD groups
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Log on UCD `home agent'.
2. Call UCD group. The call is signalled at this extension.
7.2.23 Transfer to UCD Groups
Definition
Internal and external calls can be transferred to a UCD group. If the call is not answered within a
certain period of time, a recall is carried out.
Announcements can be played for the externally transferred call.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x _ _
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 _ _
Max. no. of UCD groups 60 60 _ _
Dependencies/Limitations
Subject Dependency/Limitation
Announcements Internally transferred calls do not receive announcements.
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (33 of 48) [06/04/2000 13:09:59]
To Next Page
Loading...
