2. An incoming call is signalled acoustically once, otherwise it is only displayed on the screen.
7.2.27 Missed Calls List / Extension Number Storage
Definition
Calls which arrive at an optiset E telephone and which the user has not answered can be automatically
stored in a missed calls list in chronological order. Each entry is provided with a time stamp, and the
user can dial the entered callers directly.
Incoming and outgoing calls can also be stored in the missed calls list manually by means of a
procedure.
The arrival of a new entry can be automatically displayed by a LED. Unanswered entries can be
displayed on the screen by pressing a preprogrammed key. The LED is deactivated as soon as the user
retrieves the list.
On 2-line displays, the entries always begin with the oldest entry not yet deleted.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements U
P0/E
station U
P0/E
station U
P0/E
station _
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
General requirements optiset E with display
Subscriber group Max. 10 entries
Lists/entries 650/10 650/10 100/10 100/10
Dependencies/Limitations
Subject Dependency/Limitation
Analog trunk line Only those calls which contain an extension number or a name are recorded,
i.e. not calls on analog lines.
Power failure The entries are deleted in the event of a power failure or system reset.
Internal/external calls You can store either external calls only or both internal and external calls.
Repeated calls If a subscriber calls repeatedly, only the entry`s time stamp is updated.
Group If the subscriber belongs to a group, he can access the group`s missed calls
list in addition to his own missed calls list.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (37 of 48) [06/04/2000 13:09:59]