Siemens Hicom 150 E Office - Directed Call Pickup Outside a PU Group

The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure key for call pickup
*91 => Entry to key programming.
2. Press relevant key.
3. Assign `Group Pickup' to selected key.
4. Exit key programming.
5. Configure call pickup group
*9531994
6. 14-18 => Extension Data Menu - Call Pickup Group
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure pickup group
Options
2. Incoming Calls
3. Call pickup
4. Configure PU key
Options
5. Set up station
6. Key programming
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Call an extension in a pickup group.
2. Pick up the call from another extension in this PU group using the PU key or the code *57.
7.2.30 Directed Call Pickup Outside a PU Group
Definition
Users have the option of picking up the call from another internal extension by means of a procedure
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (41 of 48) [06/04/2000 13:09:59]