Siemens Hicom 150 E Office - Fax Waiting Message;Answering Machine

4. Exit key programming.
5. Configure DSS key
*91 => Entry to key programming.
6. Press relevant key.
7. Assign `DSS key' to selected key.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure port
Options
2. Set up station
3. Station
4. Param
5. Type
6. Configure DSS key
Options
7. Set up station
8. Program keys
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Call the answering machine.
2. Once the answering machine has answered the call, press the programmed DSS key to pick up
the call from the answering machine.
7.2.32 Fax Waiting Message/Answering Machine
Definition
A "Fax/Answering Machine" key has a LED to let the user know that a fax waiting message or a call
for the answering machine has arrived.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements Digital subs./port module _
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (44 of 48) [06/04/2000 13:10:00]