3. Program keys
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Call an internal party who has programmed the appropriate keys on his terminal.
2. Press an available line or call key on this telephone to set up an outgoing connection.
7.2.34 Extension Number Configuration via Hicom Assistant T
Definition
Hicom 150 E Office automatically assigns
internal extension numbers = regardless of the configuration
and
internal group numbers = regardless of the model.
It is not necessary to configure this explicitly. This feature can be used to administer these preset
internal numbers using Hicom Assistant T.
The menu item "Search ext. number" can be used to find the individual numbers. When you enter an
internal extension number, the logical port is displayed in the format SSPP (SS= slot, PP = port).
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Max. no. of internal extension
numbers
according to HW configuration
Max. no. of internal group numbers 150 150 150 20
Dependencies/Limitations
Subject Dependency/Limitation
Extension number configuration An internal extension/group number must always be unique within
the system and must not conflict with other numbers in the
numbering plan.
Configuration options
The feature can be configured using:
Hicom Assistant T
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (47 of 48) [06/04/2000 13:10:00]
To Next Page
Loading...
