Siemens Hicom 150 E Office - Page 466

Number of speed-dialling numbers 1000 1000 300 300
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Speed-dialling destinations
*9531994
2. 12-1 => Speed Dial - Abb. Dial No.
3. Speed-dialling names
*9531994
4. 12-2 => Speed Dial - Abb. Dial Name
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure speed-dialling
Options
2. System Parameters
3. Speed dialling system
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Set up a call using the speed-dialling feature.
2. The name of the destination appears on the display.
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
Hicom 150 E Office Rel.1.0 Service Manual - 7.4 Features for general external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_74.htm (9 of 10) [06/04/2000 13:10:14]