Siemens Hicom 150 E Office - Page 471

Dependencies/Limitations
Subject Dependency/Limitation
Call forwarding Calls comply with the call forwarding feature if activated on the night station.
Night station A telephone without direct trunk access cannot be entered as a night station.
Lines Variable night service makes no distinction between the individual lines, i.e. all
lines reach the night station.
Fax machine If, in the case of variable night service, an incoming external call reaches a terminal
with the station type "Fax", the system overrides variable night service for this call.
The call complies with the call destinations entered in CM for "External call at
night (fixed)".
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure night service / call allocation
*9531994
2. 16-17 => Call Management Inc - Non DID,Day
3. Configure authorised extension
*9531994
4. 22-19-1=> System Options - Authorisations - Night Service
5. Configure intercept position, night
*9531994
6. 16-13 => Call Management Inc - Intercept, Night
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure night service / call allocation
Options
2. Incoming Calls
3. Ringing assignment per line
4. Configure authorised extensions
Options
5. Classes of service
Hicom 150 E Office Rel.1.0 Service Manual - 7.5 Features for Incoming external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_75.htm (4 of 18) [06/04/2000 13:10:27]