6. Station
7. authorised station for night service
8. Configure intercept position, night
Options
9. System Parameters
10. Intercept criteria
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Activate night service.
2. Dial the route telephone number via the central office.
3. The call arrives at the night station.
7.5.4 Direct Inward Dialling
Definition
With direct inward dialling, an incoming call can reach an extension without involving the attendant
console.
This feature is handled in call management. The internal and external numbering system is defined in
the numbering plan.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Entrance telephone, MOH
Babyphone
Speaker terminal type
These terminals cannot be reached from the outside by means of direct
inward dialling.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Hicom 150 E Office Rel.1.0 Service Manual - 7.5 Features for Incoming external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_75.htm (5 of 18) [06/04/2000 13:10:27]
To Next Page
Loading...
