Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure MUSAP key
*91 => Entry to key programming.
2. Press relevant key.
3. Assign `Assign call' to selected key.
4. Configure signalling type
*9531994.
5. 16-19 => Call Management Inc - Ringing Type
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure MUSAP key
Options
2. Set up station
3. Key programming
4. Configure signalling type
Options
5. Set up station
6. Station
7. Param
8. Flags
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1.
2.
3.
7.5.7 DISA (Direct Inward System Access)
Definition
The DISA feature enables you to use features in the Hicom 150 E system via an external connection.
External callers must enter a password in order to gain access to the system. They can then use certain
system features just like an internal user. In addition, an outgoing external seizure can be set up via
Hicom 150 E Office Rel.1.0 Service Manual - 7.5 Features for Incoming external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_75.htm (9 of 18) [06/04/2000 13:10:28]
To Next Page
Loading...
