Siemens Hicom 150 E Office - Page 482

Subject Dependency/Limitation
DTMF-DID If the incoming call is not answered within 60 seconds, the line is released.
Intercept The line is released 30 seconds after the call is intercepted.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure DTMF-DID
*9531994
2. 16-20 => Call Management Inc - DID analog
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure DTMF DID
Options
2. Lines / networking
3. Double click on the parameter for the line
4. MSI flags
5. DTMF DID
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Seize a line and dial circuit.
2. Suffix-dial DID number.
3. DID extension rings.
7.5.10 Announcement Before Answering
Definition
This feature can be used to play an announcement for external callers from an optional external
Hicom 150 E Office Rel.1.0 Service Manual - 7.5 Features for Incoming external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_75.htm (15 of 18) [06/04/2000 13:10:28]