Siemens Hicom 150 E Office - Private Line

7.6.13 Private Line
Definition
The "private line" feature provides an extension with immediate access to a trunk line via a function
key.
A private line can be programmed with the relevant toll restriction by means of the TRG groups or by
means of a separate route.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure TRG extensions
*9531994
2. 18-3-1-1 => Boss/Secretary - TRG groups - Group Setup - Station
3. Configure TRG trunks
*9531994
4. 18-3-1-2 => Boss/Secretary - TRG groups - Group Setup - Trunk
5. Configure TRG matrix
*9531994
6. 18-3-2-1 => Boss/Secretary - TRG groups - Connection groups - Conn group
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (18 of 21) [06/04/2000 13:10:46]