Siemens Hicom 150 E Office - Page 512

Figure 7-1 LCR flow diagram
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
No. of path tables 16 16 16 16
No. of paths per path table 16 16 16 16
No. of time zones 8 8 8 8
No. of outdial rules 50 50 50 50
Characters per outdial rule 40 40 40 40
No. of dial plans 300 300 300 300
No. of dialled digits (incl. route code) 32 32 32 32
No. of evaluated digits 25 25 25 25
Dependencies/Limitations
Subject Dependency/Limitation
LCR When dialling per digit, the last element in the outdial rule must not be E(n), but
E(n)A.
Networking In the case of networking with open numbering, path replacement must not be
activated.
Hicom 150 E Office Rel.1.0 Service Manual - 7.7 Least Cost Routing (LCR)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_77.htm (6 of 8) [06/04/2000 13:10:56]