Siemens Hicom 150 E Office - Features for Internal Traffic; Direct Station Selection; Internal Traffic

7.8 Features for internal traffic
7.8.1 Internal Traffic
Definition
Internal traffic is the setting up of connections between one internal extension and another internal
extension. If the system features Prime Line on, an internal call is set up on optiset E terminals using
the `Extension' key.
If Prime Line on has not been programmed, an internal call is set up by dialling the internal extension
number.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Extension key A LED signal has not been assigned to the Extension key.
Configuration options
This feature does not have to be explicitly configured.
7.8.2 Direct Station Selection
Definition
The programmable keys on the optiset E terminal (or on the add-on console) can also be programmed
as DSS keys. In this case, the keys provided are programmed with the number of an internal extension
or of an extension group. When you press one of these keys, a direct call to the destination extension
is generated (direct station selection). The call status (ringing, busy, free) of the particular extension is
indicated by the associated LED.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements optiset E terminal
Hicom 150 E Office Rel.1.0 Service Manual - 7.8 Features for internal traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (1 of 17) [06/04/2000 13:11:10]