SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Max. number of add-on devices per
terminal
4 4 4 4
Max. number of add-on devices per
system
100 100 30 30
Max. number of freely programmable
keys per add-on device
16 16 16 16
Number of add-on devices per box 50 - - -
Dependencies/Limitations
Subject Dependency/Limitation
DSS This feature functions on optiset E terminals only.
PU A call can be answered by pressing the relevant DSS key (PU)
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure DSS key
*91 Entry to key programming
2. Press relevant key.
3. Assign `Number' to selected key.
4. Press `Extension' key [if abbreviated dialling has been enabled].
5. Enter number
6. Confirm entry
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure DSS key
Options
2. Set up station
3. Key programming
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (2 of 17) [06/04/2000 13:11:10]
To Next Page
Loading...
